Exploration and application of high-speed wire on-line automatic tail-cutting function

2024-02-06

Abstract：The tail of the high-speed wire is always cut manually before the Stellmore cooling line reaches the coil collecting cylinder. The feasibility analysis and demonstration of automatic cutting of the tail of the wire are...

Analysis and research on roll wear law of shaped steel

2024-02-06

Research on roll wear rule Rough rolling pass wear: Butterfly hole wear: Finished pass wear:   Roll hardness is not uniform. The pass design is not reasonable. Other ...

Senjimir twenty high cold rolling mill

2024-01-22

The essential difference between Senkimir cold rolling mill and four-high rolling mill or other types of rolling mill is that the direction of transmission of rolling force is different. The rolling force of the Senkimir cold m...

Research and application of rod and wire controlled rolling and controlled cooling technology

2024-01-10

Abstract.：In the control process of rod and wire production, it must make application analysis of the two aspects of controlled rolling and controlled cooling technology, pay attention to the control content in the control key ...

Discussion on automatic control system of cold rolling pickling unit

2023-12-20

Abstract.：Cold-rolled steel is a kind of production raw materials widely used at present, and its product production quality and production efficiency have been widely concerned and highly valued by all walks of life. Pickling ...

Analysis and application of rod loop control principle

2023-12-07

Abstract.：The principle of looper control and the function of system control are described. In view of the fact that the running condition of the looper directly affects the quality of the product and the efficiency of the prod...

Surface quality defect analysis of hot rolled strip

2023-12-07

Abstract：With the development of information technology, the process and quality control platform will play an active role in the hot rolling production process. By combining data-driven algorithm and intelligent algorithm, thi...

Analysis and control of corrugation defects of cold rolled strip after leveling

2023-11-13

Abstract：This paper analyzes the causes of corrugation defects in the rolling process of annealed strip steel, introduces the measures of controlling the rolling temperature, optimizing the rolling process and reforming the dri...

Cause analysis and control of roller ring explosion in Yangchun New Iron and Steel high line

2023-11-03

Abstract：According to the phenomenon of tungsten carbide roll explosion in high line of Yangchun New Iron and Steel rolling mill, this paper analyzes the causes of tungsten carbide roll explosion in detail through site...

Analysis and control measures of buckle head in rolling process of wide and thick plate

2023-10-24

Abstract: This paper mainly analyzes the reasons why the head and tail of the rolled piece often buckle in the production process of the 4300 wide and thick plate production line of Laiwu Iron and Steel Co., LTD., and gives...

Analysis and improvement of seam adjustment and misalignment of flat/vertical conversion mill

2023-10-08

Abstract:Due to the particularity of the use of the flat/vertical converter, the design, manufacture and use of the rolling mill have higher requirements in the actual use of the site, if the design and manufacture are...

Analysis and treatment of pile steel problems in high line production

2023-09-06

Abstract: The paper analyzes the causes of some typical stacking accidents in the process of high speed wire rod production in the rough rolling area, pre-finishing area, finishing rolling area, pinch roll, spinning machine are...